Manual Air and Wet Blast Cabinets
A complete range of airblast cabinets are available, from manual to highly automated machines. All dry and free running abrasives can be used.
For a competitively-priced machine for standard one-shift operations, you won't go wrong with the high quality SmartLine cabinet. Various options are available, including turntables, and rotating barrels.
For absolute precision and a 20% improvement in efficiency (compared to other airblast cabinets in the market) that can be customised to suit your 1, 2 or 3 shift operation, then look no further than the outstanding Vacu-Blast Ventus cabinet.
In the wet blasting process a water-abrasive mixture is used. The water washes contaminants like grease and oil away, and dust is eradicated. Wet blasting is often used for refurbishing parts such as motor and compressor parts, or in very clean environments, such as aerospace and medical applications.
Pressure Fed Air Blasting
The pressure fed air blast cabinets from Wheelabrator have been designed specifically for production applications where a high work output is required, combined with optimum abrasive quality.
Suction Fed Air Blasting
Suction fed air blast cabinets have been designed specifically for production applications where a less aggressive surface treatment is required. Suction fed blasting has a lower performance than pressure fed blasting, but uses significantly less compressed air.
0 to 6 weeks
SmartLine Airblast Cabinet
Mild steel constructed, standard, suction and pressure fed airblast cabinets to ensure efficient operation and maximum operator comfort in full production environments.
6 to 12 weeks
Vacu-Blast Ventus Cabinet
Favorite machine in the Aerospace and also the medical industry, where keeping abrasive quality is very important, the Ventus range is versatile enough to allow all types of personalization. Available as pressure fed or suction fed cabinets.
6 to 12 weeks
Vaqua Wet Blast Cabinet
The Vaqua range has been designed specifically for production applications where a high work output and optimum performance is required. The Wet Blast process provides component cleaning, degreasing and finishing in one operation.