IT Published

Nuovo prodotto: robot di pallinatura

Sfida

Offre tempi di elaborazione tre volte più rapidi con un’affidabilità del processo totale

Sin dagli inizi della tecnologia di granigliatura, i tecnici hanno lavorato per sviluppare una macchina di pallinatura in grado di integrare i vantaggi di un processo ad aria preciso e dai contorni controllati con quelli delle applicazioni di granigliatura efficienti. 

L’obiettivo è di estendere sensibilmente la vita utile del pezzo di lavoro trasformando la tensione da compressione in tensione da trazione in un tempo di elaborazione più breve estremamente efficiente ed efficace.

Solution

Together with Daimler, Gaggenau a special Shot Peening concept has been developed by the engineers at Wheelabrator in Metelen and Germany, to increase the fatigue strength of drive/crown wheels in axle gears. 

The concept is a combination of a high-performance wheelblast machine with a KUKA robot KR 500. 

The workpiece is manoeuvred into the wheelblast stream with millimetre precision to generate the internal compressive stress in the tooth root of drive/crown wheels.

The concept is completely flexible and can process different workpieces. In a very short time frame the robot can change the workpiece holder and process a number of workpieces in quick succession. To achieve this, the robot takes one holder from a magazine and afterwards the relevant workpieces from one of four loading/unloading stations. The selection of workpieces and holders is carried out automatically following the production control programme.

Flexibility and precision

In one working process the robot can take two axle gear parts with a unit weight of 25 kg (maximum). This double action shortens the cycle time per workpiece. After loading, the robot arm docks to a flexible membrane seal in front of the blast wheel. This specially designed seal provides the necessary mobility for the robot, but also avoids media escape during the blasting process so that the robot arm and adjacent machine components are protected from damage. Now the robot can place the workpieces in the optimum position in front of the wheelblast stream. After input of the blasting points, the precise position is automatically calculated. The blasting point is optimised by three-dimensional motions of the robot gripper within the membrane seal.

The robot can move the workpiece during the process so that the surfaces to be peened maintain exactly defined distances to the blast wheel and fixed media impact angles. This assures a constant blast result providing the customer’s desired extension of the service life of the product. Furthermore, the concept allows parts to be processed three times quicker than conventionally designed machines.

Contattaci

Compila il modulo

Norican

Trova il contatto più vicino

Se preferisci parlare direttamente con qualcuno, fai clic qui sotto per trovare un numero di telefono/indirizzo di un rappresentante nel tuo paese.

Fai clic qui

Il vostri dati